MBR IT/.NET 247 : Could not find a part of the path on ASPFriends.com 'ngfx-io' list

Could not find a part of the path

Messages

Related Types

This message was discovered on ASPFriends.com 'ngfx-io' list.

Carlos Magalhaes

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV=3D"Content-Type" CONTENT=3D"text/html; =
charset=3Dus-ascii">
<META NAME=3D"Generator" CONTENT=3D"MS Exchange Server version =
5.5.2652.35">
<TITLE>Could not find a part of the path </TITLE>
</HEAD>
<BODY>

Hi all ,


I don't understand this.....


Firstly when I specified the normal unc =
\\ser1-dmn4-dc4\myfolder\mysecondfolder for directory.create gave =
errors cant find path I did a trace back to it and it was miss spelling =
it like \ser1-dmn4-dc4myfoldermysecondfolder so then I went and re =
wrote it \\\ser1-dmn4-dc4\\myfolder\\mysecondfolder

Did a trace and found that it was the correct path =
\\ser1-dmn4-dc4\myfolder\mysecondfolder.


But then when I used it with directory.create it =
keeps saying cant Could not find a part of the path =
\\ser1-dmn4-dc4\myfolder

What is going on and why is it not working I have =
checked the path via Dos via start run etc and it defintely works the =
everyone group has full perm on those folders and sub =
folders!

Thank you for the help I am really getting frustrated =
here


Carlos


</BODY>
</HTML>

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

ToddC@match.com

Are you trying to create directories on the local machine, or ?
What is the current directory? (GetCurrentDirectory())

tc

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Wednesday, May 22, 2002 3:11 PM
To: ngfx-io
Cc: Click here to reveal e-mail address
Subject: [ngfx-io] Could not find a part of the path

Hi all ,
I don't understand this.....
Firstly when I specified the normal unc
\\ser1-dmn4-dc4\myfolder\mysecondfolder for directory.create gave errors
cant find path I did a trace back to it and it was miss spelling it like
\ser1-dmn4-dc4myfoldermysecondfolder so then I went and re wrote it
\\\ser1-dmn4-dc4\\myfolder\\mysecondfolder
Did a trace and found that it was the correct path
\\ser1-dmn4-dc4\myfolder\mysecondfolder.
But then when I used it with directory.create it keeps saying cant Could not
find a part of the path \\ser1-dmn4-dc4\myfolder
What is going on and why is it not working I have checked the path via Dos
via start run etc and it defintely works the everyone group has full perm on
those folders and sub folders!
Thank you for the help I am really getting frustrated here
Carlos
| [ngfx-io] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-io.asp = JOIN/QUIT
------------------------------------------------------------- This email and
any files transmitted are confidential and intended solely for the use of
the individual or entity to which they are addressed, whose privacy should
be respected. Any views or opinions are solely those of the author and do
not necessarily represent those of the Trencor Group, or any of its
representatives, unless specifically stated. Email transmission cannot be
guaranteed to be secure, error free or without virus contamination. The
sender therefore accepts no liability for any errors or omissions in the
contents of this message, nor for any virus infection that might result from
opening this message. Trencor is not responsible in the event of any third
party interception of this email. If you have received this email in error
please notify Click here to reveal e-mail address For more information about Trencor,
visit www.trencor.net

Reply to this message...

Carlos Magalhaes

Hi Todd,

No I am trying to create directories on a remote server the share in which I
am trying to create the folder has everyone full perm.

?????

-----Original Message-----
From: Click here to reveal e-mail address [mailto:Click here to reveal e-mail address]
Sent: Wednesday, May 22, 2002 11:38 PM
To: ngfx-io
Subject: [ngfx-io] RE: Could not find a part of the path

Are you trying to create directories on the local machine, or ?

What is the current directory? (GetCurrentDirectory())

tc

-----Original Message-----
From: Carlos Magalhaes [mailto:Click here to reveal e-mail address]
Sent: Wednesday, May 22, 2002 3:11 PM
To: ngfx-io
Cc: Click here to reveal e-mail address
Subject: [ngfx-io] Could not find a part of the path

Hi all ,

I don't understand this.....

Firstly when I specified the normal unc
\\ser1-dmn4-dc4\myfolder\mysecondfolder for directory.create gave errors
cant find path I did a trace back to it and it was miss spelling it like
\ser1-dmn4-dc4myfoldermysecondfolder so then I went and re wrote it
\\\ser1-dmn4-dc4\\myfolder\\mysecondfolder

Did a trace and found that it was the correct path
\\ser1-dmn4-dc4\myfolder\mysecondfolder.

But then when I used it with directory.create it keeps saying cant Could not
find a part of the path \\ser1-dmn4-dc4\myfolder

What is going on and why is it not working I have checked the path via Dos
via start run etc and it defintely works the everyone group has full perm on
those folders and sub folders!

Thank you for the help I am really getting frustrated here

Carlos

| [ngfx-io] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-io.asp = JOIN/QUIT

| [ngfx-io] member Click here to reveal e-mail address = YOUR ID |
http://www.aspfriends.com/aspfriends/ngfx-io.asp = JOIN/QUIT

------------------------------------------------------------- This email and
any files transmitted are confidential and intended solely for the use of
the individual or entity to which they are addressed, whose privacy should
be respected. Any views or opinions are solely those of the author and do
not necessarily represent those of the Trencor Group, or any of its
representatives, unless specifically stated. Email transmission cannot be
guaranteed to be secure, error free or without virus contamination. The
sender therefore accepts no liability for any errors or omissions in the
contents of this message, nor for any virus infection that might result from
opening this message. Trencor is not responsible in the event of any third
party interception of this email. If you have received this email in error
please notify Click here to reveal e-mail address For more information about Trencor,
visit www.trencor.net

-------------------------------------------------------------
This email and any files transmitted are
confidential and intended solely for the
use of the individual or entity to which
they are addressed, whose privacy
should be respected. Any views or
opinions are solely those of the author
and do not necessarily represent those
of the Trencor Group, or any of its
representatives, unless specifically
stated.

Email transmission cannot be guaranteed
to be secure, error free or without virus
contamination. The sender therefore
accepts no liability for any errors or
omissions in the contents of this message,
nor for any virus infection that might result
from opening this message. Trencor is not
responsible in the event of any third party
interception of this email.

If you have received this email in error please notify
Click here to reveal e-mail address For more information about
Trencor, visit www.trencor.net <http://www.trencor.net>

Reply to this message...

MBR BootFX
Best-of-breed application framework for .NET projects, developed by Matthew Baxter-Reynolds and MBR IT

	Copyright © Matthew Baxter-Reynolds 2001-2008. '.NET 247 Software Development Services' is a trading style of MBR IT Solutions Ltd.
	Contact Us - Terms of Use - Privacy Policy - www.dotnet247.com